New-generation software brings ABZ’s own mission planning method, a redesigned flight screen and one control environment across the company’s agricultural and industrial drones
SZENTENDRE, Hungary — November 20, 2026 — ABZ Innovation, a European developer and manufacturer of heavy-duty civilian drones for agricultural and industrial use, today released ABZ Control 3.0, a new generation of the software its customers use to plan, fly and monitor their drones. Developed in-house by the company’s R&D team under Zsombor Vejtey, Head of R&D, the release rebuilds the interface from the ground up while keeping the functions operators rely on, and prepares it for future developments. ABZ Control 3.0 applies to the company’s L-, M- and C-Series drones.
ABZ Control runs on the remote controller of every ABZ Innovation drone. Version 3.0 is a new generation of the software: rather than adding individual features, the team reworked every part of the software, from the first screen an operator sees to the way missions are planned, flown and stored. At its core is the new Navi Board software environment, which brings mission planning, application settings and system information together in one place, and the interface has been prepared for future developments.
ABZ Innovation uses the same controller software across its L-Series spraying and spreading drones, its multifunctional M-Series and its C-Series industrial cleaning drones. ABZ Control 3.0 remembers which drone a controller was last paired with and loads the matching interface, even before the drone is connected. Operators see only the functions that apply to their drone and payload, and the interface of one series never appears on another. The release applies to all three series.
The flight screen has been rebuilt around a new header that gives direct access to the settings operators change most often in the field. RTK can be switched on and off and RTK profiles selected without leaving the flight screen. Battery failsafe actions at the 30% and 20% thresholds, signal-loss behavior during automatic missions and return-to-launch altitude can each be changed in a few taps. Every panel links to the matching section of the settings for deeper changes, and the settings themselves now slide in from the side, leaving the map and camera feed visible. A dedicated clock means pilots no longer need to read the time from the system bar.
The screen uses a glass-effect tile layout, and function buttons are placed for the pilot’s hands. Controls are larger throughout, and typed values have been replaced by sliders and +/– steppers with defined minimum and maximum values. A new icon set was designed for this release, with the goal of making each function recognizable at a glance.
Error messages no longer repeat on screen every few seconds. ABZ Control 3.0 filters repeated messages, keeps an alert visible for as long as the issue persists and confirms when it has been cleared. Uploads, downloads and other data exchange with the drone are shown with a progress indicator. The interface also separates three access levels: the operator view, an advanced view for distributor support teams and a developer view, each clearly marked.
At the bottom of the flight screen, a circular camera view shows the most useful central part of the image while leaving most of the screen to the map. It carries a rotating compass, an artificial horizon and a marker pointing to the home point. A zoomable minimap keeps the overall picture in view. One tap swaps the map and the camera feed; in camera mode, a zoom slider sits under the pilot’s left thumb. Speed, altitude, relative altitude and distance from home remain visible, and a compact data card follows the drone when the rest of the interface is hidden. A built-in measuring tool gives distances, perimeters and areas, in metric or imperial units, during flight as well as in planning.
For the first time in the history of ABZ Control, mission planning follows a method developed by ABZ itself, in three steps. In the first step, the operator defines the area and any obstacles, either by drawing point by point, by importing a shapefile or, in manual mode, by recording corner points with the drone or controller position. In the second, each mission parameter is set in turn: spacing, angle (with an automatic best-angle option), margin, entry point, altitude and altitude mode, speed, droplet size and coverage. In the third, the mission is named automatically, saved and uploaded, and the operator goes straight to the operation screen.
Separating the design step from route calculation reduces the processing load on the controller and removes a common source of input errors. Coverage is set in two ranges, 10–30 l/ha and 30–200 l/ha, and the slider automatically returns to the highest value the drone can deliver with the chosen parameters. The variable-rate planning and operation screens have been fully redesigned, with zone indications: missions based on imported prescription maps can be adjusted zone by zone. Advanced Planning allows individual actions at each waypoint, such as switching the payload on or off, changing altitude or speed, or, on the M-Series, triggering servo outputs.
The mission file system has also been completely rethought. Saved missions are stored in a library that can be filtered by payload and date and sorted by name, date or distance from the operator. Each mission can be previewed with its area, estimated flight time, route length and required volume before it is uploaded.
Once a mission is uploaded, the flight screen shows the treated area, obstacles, the planned route and the drone’s direct path to the mission start and to home. As the drone sprays, the area already covered is shaded on the map. Interactive Tank Tracking, available for all applications, lets the operator enter the tank volume and see, on the map, where the tank will run dry; the tank display then empties in real time. Flight Options allow speed, coverage, droplet size and altitude to be adjusted within ±40% of the planned values without re-planning. Before an automatic mission starts, the operator confirms the return-to-launch altitude and that the take-off area is clear.
On spraying drones, the test spray is now set in liters per minute and droplet size in microns or ISO droplet classes, directly from the flight screen, instead of in technical control values in the settings. During application, the same panel shows the current flow on each pump channel. Spreading and Trichogramma payloads show their own live feedback.
Flight data, missions and settings stay within the ABZ Innovation ecosystem and are not sent to third-party servers, in line with the company’s focus on full data sovereignty for agricultural and industrial customers.
“We didn’t add a feature here and there. We went back to every part of the software and rebuilt it, and kept the functions our operators depend on. For the first time in the history of ABZ Control, mission planning follows a method we designed ourselves. The aim is simple: an operator should understand what the drone is doing at a glance, without having to read a manual.”
— Zsombor Vejtey, Head of R&D, ABZ Innovation
“We have put a lot of effort into making everyday drone operations easier. Regular software updates are part of how we support our customers, and with ABZ Control 3.0, everyday work becomes simpler and clearer.”
— Károly Ludvigh, CEO & Co-Founder, ABZ Innovation
ABZ Control 3.0 is released on November 20, 2026, for L-, M- and C-Series drones, and is rolled out to existing customers through the usual update process. A video walkthrough is available on the ABZ Innovation YouTube channel, and ABZ’s distribution and service partners in more than 40 countries provide operator training and support.
| Area | What’s new in ABZ Control 3.0 |
|---|---|
| Interface | Rebuilt from the ground up around the Navi Board software environment; glass-effect tile layout; function buttons placed for the pilot’s hands; new icon set; sliders and +/– steppers instead of typed values; slide-out settings panel; prepared for future developments |
| Drone series | Applies to L-, M- and C-Series; remembers the last connected drone and loads the matching interface, also offline |
| Flight screen header | Quick access to flight modes, RTK profiles (network and LoRa RTK), battery failsafe thresholds, signal-loss (GCS) failsafe, return-to-launch altitude and a built-in clock |
| Alerts | Repeating messages filtered; alerts stay until the issue is resolved; progress indicators for uploads and data exchange |
| Navigation | Circular camera view with rotating compass, artificial horizon and home point marker; zoomable minimap; one-tap map/camera swap with zoom slider; distance, perimeter and area measurement, also during flight |
| Mission planning | ABZ’s own three-step method: Design, Parameterize, Upload. Area drawing and shapefile import, manual (corner points by drone or controller position), Advanced Planning with custom waypoints; fully redesigned variable-rate planning and operation screens with zone indications |
| Mission files | Completely rethought mission file system: save, filter, sort and preview missions with area, estimated flight time, route length and required volume before upload |
| Operation | Live coverage display; Interactive Tank Tracking for all applications; Flight Options within ±40% of planned values; two safety confirmations before mission start |
| Spraying | Flow rate in l/min and droplet size in microns or ISO classes, set from the flight screen; coverage from 10 to 200 l/ha in low-rate and high-rate ranges |
| Data | Flight data, missions and settings stay within the ABZ Innovation ecosystem; no third-party servers |
ABZ Innovation is a European developer and manufacturer of heavy-duty action drones for agricultural and industrial applications. Based in Szentendre, Hungary, the company builds high-performance drone systems for spraying, spreading, cleaning and specialized industrial tasks, prioritizing reliability, serviceability and full data sovereignty. Operating in more than 40 countries through a global distributor and service partner network, ABZ Innovation supports customers with professional training, spare parts supply and long-term operational support. For more information: www.abzinnovation.com