ABZ Innovation C10: A Smarter Way to Clean at Height
High-altitude cleaning often requires rope access, scaffolding, cranes or elevated platforms. These methods can be effective, but they also involve additional equipment, preparation, specialist personnel and work-at-height risks.
The ABZ Innovation C10 offers a different approach: instead of bringing people to the surface, it brings the cleaning system to the surface.
Designed for hard-to-reach areas, the C10 combines high-pressure cleaning, RTK positioning and radar-based surface control to enable controlled cleaning while the operator remains on the ground.
Key Advantages
Up to 60 m operating altitude
Up to 225 bar water pressure
Radar-assisted surface distance
RTK positioning for accurate operation
Angle Follow Mode for curved and uneven surfaces
Reduced need for rope access, scaffolding and lifting equipment
Where It Makes a Difference
The C10 is particularly effective for facades, industrial structures, chimneys, roofs, solar panels and other difficult-to-access surfaces. Where conventional access is complex or time-consuming, aerial cleaning can provide faster deployment, greater flexibility and reduced work at height.
Proven in Real-World Applications
Real-world projects consistently demonstrate one of the C10’s key advantages: faster and simpler access to difficult-to-reach surfaces.
Across drone cleaning projects, customer feedback consistently highlights the time saved compared with conventional access methods. Traditional approaches such as rope access, scaffolding or lifting equipment can require extensive preparation and, depending on the site, may take days before the actual cleaning can begin. The C10 can significantly simplify this process by bringing the cleaning system directly to the surface while keeping the operator on the ground.
The C10 can also be used for a two-phase cleaning process, combining low-pressure foam application with high-pressure washing. The foam helps loosen and break down contamination before the final high-pressure cleaning stage, improving the overall cleaning process on heavily soiled surfaces.
120 m² | 30 m high | ~40 min
Industrial chimney cleaning despite difficult roof access.220 m² | ~1 hour
Brick surface cleaning, including setup and battery changes.550 m² | ~3 hours
Heavily moss-covered roof cleaned without chemical treatment.
Actual performance depends on surface condition, cleaning configuration and operating conditions.
C10 + ABZ Clean Station
Combined with the ABZ Innovation Clean Station, the C10 becomes a complete professional cleaning system, combining aerial access with ground-based water and cleaning-fluid management.
The Clean Station provides the infrastructure needed for continuous professional operation, including water treatment, water storage and supply. Its integrated reverse-osmosis (RO) system can produce purified water for applications where a spot-free finish is required.
This makes the Clean Station particularly valuable for applications such as glass, solar panels and other sensitive surfaces, where mineral deposits or water spots can compromise the final result.
Together, the C10 and Clean Station combine aerial access, foam application, high-pressure cleaning and professional water treatment in one integrated workflow — reducing the need for complex access equipment while supporting a more consistent cleaning process.
More Than a Cleaning Drone
The C10 is not designed to replace every conventional cleaning method. Its strength lies in applications where access, safety and preparation are the main challenges. By moving the cleaning operation from the structure to the ground, the C10 can provide a safer, faster and more flexible alternative to traditional high-altitude cleaning methods.
Bring the Cleaning drone to the surface — not the people.
